Search Products
SEARCH PRODUCT
Nviro Solutions is founded by technically qualified individuals with rich experience in the niche’ of Highly Accelerated Testing Products and Materiel. Search our products by selecting your desired category in the dropdown given below.
SEARCH PRODUCT
Nviro Solutions is founded by technically qualified individuals with rich experience in the niche’ of Highly Accelerated Testing Products and Materiel. Search our products by selecting your desired category in the dropdown given below.
NO PRODUCTS AVAILABLE
email at info@nvirolsolutions.com for more info
H-OA-216 Altitude Test Chamber
Test specimens in our altitude chamber for various applications including, but not limited to, aerospace and aviation
- USB and LAN Port for data communication
- PC Link and MODBUS communication
- Stainless Steel #304 interior
- LCD touchscreen controller
- 2″ Cable access port w/ plug
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimension | 23.62W x 23.62H x 23.62D Inch | 600W x 600H x 600D mm |
| Exterior Size | 27.56W x 59H x 31.5D Inch | 700W x 1500H x 800D mm |
| Temp Range | Room (~68˚F) | Room (~20˚C) |
| Pressure Range | 1 atm | 55 kPa ~ 101 kPa |
| Pressure Uniformity | ≤ ±0.02 atm | ≤ ±2 kPa |
| Pressure Pull Down Rate | 0.05 atm/min | 5 kPa/min |
| Vacuum Gauge Control Accuracy | ±3% | ±3% |
| Weight | ~660 Lbs | ~300 Kg |
| AC Power | 220VAC/60Hz/Three Phase |
No Models Avaliable
HST-1000A-DT Battery Test Chamber
We provide walk-in controlled temperature boxes that will give you excellent temperature control and operation reliability you are looking for. Our systems are commercially proven and cost effective. We operate our business where reliability and customer satisfaction is our way of doing business.
HST-1000A-DT, HST-800A-DT, HST-225A-DT Ask for details on other sizes of Battery Test Chambers including Walk-In Chamber sizes
- Hi-Grade Stainless steel-Explosion proof
- Special equalization vent
- Chamber Temperature monitoring
- Test Specimen/Product Temperature monitoring
- Gas monitoring & detection
- Fire/Smoke detection & suppression
- Safety door locking safety mechanism
- Explosion proof
- Explosion prevention Blow off Port
- Explosion Venting
- Special equalization venting system
- Rapid Air Expansion
- Purging system (Gn2, etc.)
- Sheathed heater (Temperature limited)
- Using LN2 or other methods such as Class ABC or BC dry chemical fire extinguisher (optional)
- High-quality, movable/fixable PU active wheels
- Applications: Lithium-Ion, etc.
- Types of batteries: Battery Testing, Battery Containment, etc..
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Model | HST-1000A-DT | HST-1000A-DT |
| Interior Dimension | 3ft D x 3ft W x 3ft H | 1000D x 1000W x 1000H mm |
| Exterior Dimensions | 3.96ft D x 4.92ft W x 7.02ft H (approx) | 1210D x 1500W x 2140H mm (approx) |
| Volume | 35 cu ft | 1000 Liters |
| Temperature Range | 68°F ~ 302°F or Per customer requirements | 20ºC ~ +150ºC or Per customer requirements |
| Controller | Programmable, Touch Screen, Remote control | |
| AC Power Sources | 480VAC/60Hz/3-Phase, 25 Amps (Other Options Available) | |
HST-1000A-DT
HST-800A-DT
HST-225A-DT
Walk-In HST-9600A-DT
HST-70A/70B - ES Bench Top Humidity Chambers
HST-70D-ES Bench Top Humidity Chambers
- Stainless Steel Plate (SUS#304, Mist) Interior
- Steel Plate [Baked Panel] Exterior
- High Density Polyurethane Froth Insulation
- Unique, uniform airflow system
- Vane Type Sirocco, L134, Fan
- SUS #304 Stainless Steel, PT 100 Ω, Temp-Hum Sensors (2)
- Fin Heat Disperse-Stainless Steel Heater
- PID controlled-Stainless Steel Humidifier
- Hermetic-Single Compressor
- Dupont [No Fluorine] Refrigerant
- Air cooled Type Condenser
- Multi-segment, Automatic Adjustment Evaporator
- High efficiency Temperite Type Oil Separator
- TEMI-300 Programmable LCD Controller
- RS-485 Communication Port/Connector
- SUS#304L-SS, PT 100 Ω Sensors
- Single Door
- Observation Window; Anti-condensation & frost free
- Cable Port with Plugs
- Water Tank
- Adjustable Shelves, Stainless Steel (2)
- Anti-explosive interior lamps [Lighted Push Button Switch]
- Redundant safety features
- Fire Protection
- Fast recovery fuses
- Compressor overload
- High pressure protect
- Phase reversal protect
- Circuit breaker system
- Lack of water detector
- Humidifier thermal overshoot protector
- Alarms
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | -94 °F to +302 °F | -40°C to 150°C |
| Temperature Constancy | ±0.9°F (adjustable) | ±0.5°C (adjustable) |
| Temperature Uniformity | ±3.6°F | ±2.0°C |
| Humidity Range | 30 to 95% RH | 30 to 95% RH |
| Humidity Constancy | ±2.0% RH | ±2.0% RH |
| Heating Rate | -94 °F to +302 °F Approx. 80 mins. | +20°C to +150°C Approx. 40 mins. |
| Cooling Rate | +68 °F to -94 °F Approx. 90 mins. | +20°C to -40°C Approx. 70 mins. |
| Volume | 21.13 GAL | 70 Liters |
| Interior Dimension | 15.7W x 19.7H x 15.7D IN [Many Other Sizes Available] | 400W x 500H x 350D mm [Many Other Sizes Available] |
| Exterior Dimension | 23.6W x 63.8H x 32.3D IN | 1085W x 940H x 880D mm |
| AC Power Sources | 220VAC/60Hz/Single-Phase, 15Amps [Other Options Available] | 220VAC/60Hz/Single-Phase, 15Amps [Other Options Available] |
| Weight | Approximately 573 lbs | Approximately 160 Kg |
- HST-70A-ES
- HST-70B-ES
- HST-70C-ES
- HST-70D-ES
HST 640 DB Blowing Dust Test Chamber
Nviro Solutions Dust Chambers are made for the simulation of Dust and Sand conditions in a controlled atmosphere.
In general, these chambers are made to perform per the following standards:
- IEC-600529
- DIN-40050 IP5X & IP6X,
- SAE-J575
- ISO-20653
- IEC-60068-2-68
- Mil-Std 810F
Please specify the correct standards when requesting information on the various Dust Chambers available from Nviro Solutions.
These chambers are used in particular for evaluating the effects of dust-laden environments per the above standards. These chambers are utilized in several industries and applications such as for Military & Defense, Automotive, Computer Systems, Optics and Displays, Materiel, Coatings, Solar Energy, etc.
- Interior of Chamber is specially made from non-magnetic stainless steel
- The Dust collection section is located just below the test compartment.
- The air velocity for the generation of dust is controlled by a dust blowing mechanism that includes a Motor/Blower combination
- A viewing window with a manually controlled wiper is included in all standard models.
- One standard shelf for placing test specimens is included. Additional options are available.
- Temperature Control & Display Unit
- Humidity Control & Display Unit
- Wind Speed Control & Display Unit
- Dust Concentration Control & Display Unit
- Data Monitoring & Recording for Temperature, Humidity, Wind and Dust. Concentration data can be monitored and recorded in real time. The saved data can be later displayed and printed.
- High pressure circle air fan & Wind speed (1.0 to 10 m/s) generator attached with wind speed adjustor.
- Dust Adjustment Device to adjust dust volume
- Automatic dry air handling system (does not include compressed air)
- Manually rotatable 300mm table for moving test specimens inside the dust chamber
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | +73.4 °F to +158 °F | +23 °C to +70 °C |
| Humidity Range | <30% RH | <30% RH |
| Air Speed | 1.0 to 10.0 m/s | 1.0 to 10.0 m/s |
| Dust Consistency Range | 3.0 to 17.6 g/m³ (min.)(17.6 ± 7 g/m³) | 3.0 to 17.6 g/m³ (min.)(17.6 ± 7 g/m³) |
| Interior Dimension | 39.4W x 31.5H x 31.5D IN | 1000W x 800H x 800D mm |
| Exterior Dimension | 165W x 86.6H x 63D IN | 4200W x 2200H x 1600D mm |
| Door | 43.3 x 35.4 IN | 1100 x 900 mm |
| Observation Window | 23.6 x 23.6 IN | 600 x 600 mm |
| Power Sources | 440VAC/60Hz/70A/45KW | 440VAC/60Hz/70A/45KW |
Not Available
HST 640 DS Blowing Sand Test Chamber
Nviro Solutions Dust Chambers are made for the simulation of Dust and Sand conditions in a controlled atmosphere.
In general, these chambers are made to perform per the following standards:
- IEC-600529
- DIN-40050 IP5X & IP6X,
- SAE-J575
- ISO-20653
- IEC-60068-2-68
- Mil-Std 810F
Please specify the correct standards when requesting information on the various Dust Chambers available from Nviro Solutions.
These chambers are used in particular for evaluating the effects of dust-laden environments per the above standards. These chambers are utilized in several industries and applications such as for Military & Defense, Automotive, Computer Systems, Optics and Displays, Materiel, Coatings, Solar Energy, etc.
Standard
MIL STD 810F Method 510.4 Para 4.4.3- Procedure II – BLOWING SAND
Used to investigate the susceptibility of materiel to the effects of blowing large particles of sand (150 µm to 850 µm)
All our equipment is manufactured in accordance to ISO-9000 procedures.
- Interior of Chamber is specially made from non-magnetic stainless steel
- The Dust collection section is located just below the test compartment.
- The air velocity for the generation of dust is controlled by a dust blowing mechanism that includes a Motor/Blower combination
- A viewing window with a manually controlled wiper is included in all standard models.
- One standard shelf for placing test specimens is included. Additional options are available.
- Temperature Control & Display Unit
- Humidity Control & Display Unit
- Wind Speed Control & Display Unit
- Dust Concentration Control & Display Unit
- Data Monitoring & Recording for Temperature, Humidity, Wind and Dust. Concentration data can be monitored and recorded in real time. The saved data can be later displayed and printed.
- High pressure circle air fan & Wind speed (1.0 to 10 m/s) generator attached with wind speed adjustor.
- Dust Adjustment Device to adjust dust volume
- Automatic dry air handling system (does not include compressed air)
- Manually rotatable 300mm table for moving test specimens inside the dust chamber
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | +73.4 °F to +158 °F | +23 °C to +70 °C |
| Humidity Range | <30% RH | <30% RH |
| Air Speed | 18 to 29 m/s | 18 to 29 m/s |
| Sand Consistency | 0.18 +0.2 g/m³ (min.) 1.1 ± 0.3 g/m³ (nominal) 2.2 ± 0.5 g/m³ (max.) | 0.18 +0.2 g/m³ (min.) 1.1 ± 0.3 g/m³ (nominal) 2.2 ± 0.5 g/m³ (max.) |
| Interior Dimension | 39.4W x 31.5H x 31.5D IN | 1000W x 800H x 800D mm |
| Exterior Dimension | 185W x 98.4H x 86.6D IN | 4700W x 2500H x 2200D mm |
| Door | 43.3 x 35.4 IN | 1100 x 900 mm |
| Observation Window | 23.6 x 23.6 IN | 600 x 600 mm |
| Power Sources | 440VAC/60Hz/120A/45KW | 440VAC/60Hz/120A/45KW |
Not Available
HST-170M3-LJS-B Model # HST-170M3-LJS-B
Customized Dual Dust and Sand Chamber HST 3M3-BDS Dual Dust & Sand Chamber
Use our Sand and Dust chamber to simulate an accurate environmental condition with capable wind speeds of up to 29 m/s and temperatures up to 70ºC.
Our one of a kind sand and dust chambers are qualified to test against the below list of standards.
MIL STD 810F/G – Method 510.5 and Method 510.4.
- Cable access port w/ plug
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimension | 27.56W x 27.56H x 27.56D Inch | 700W x 700H x 700D mm |
| Exterior Size | 14.75W x 8.2H x 7.21D ft. | 4500W x 2500H x 2200D mm |
| Temp Range | 23˚C ~ 70˚C | |
| Temp Uniformity | ≤ ±3.6ºF | ≤ ±2.0ºC |
| Humidity Range | <30%RH | |
| Air Speed: Procedure I | 1.0 ~ 10.0 m/s | |
| Air Speed: Procedure II | 18.0 ~ 29.0 m/s | |
| Sand and Dust Consistency: Procedure I | 3.0 ~ 17.6 g/m³ (10.6 ± 7 g/m³) | |
| Sand and Dust Consistency: Procedure II | 0.18 + 0.2 g/m³; 1.1 ± 0.3 g/m³; 2.2 ± 0.5 g/m³ | |
| AC Power | 480VAC/60Hz/Three Phase/70A/45Kw |
Not Available
HST 216/343/640/1000 BDS Dual Dust & Sand Chamber
Nviro Solutions Dust Chambers are made for the simulation of Dust and Sand conditions in a controlled atmosphere.
Standard
MIL STD 810F – Method 510.4.Para 4.2.2, Procedure 1 – Blowing Dust
MIL STD 810F – Method 510.4.Para 4.2.3, Procedure II – Blowing Sand
- Interior of chamber made of high quality stainless steel (SUS#304). Exterior of chamber is made of solid baked painted Steel plate. Interior of chamber treated with high temperature protection material. Chamber body connected to ground for ant-static protection.
- The Airflow Cycle System uses Baked Painted Steel Plate with over temperature protection.
- High pressure air circulating fan for wind speed 1.0 ~ 29.0 m/s attached with a wind speed adjustor.
- Electric heater with SSR & PID control for constant temperature.
- Dust Supplementary Device used for automatically adjusting the dust volume based on set values.
- Automatic Dry Air Handling System
- Chamber is well sealed and sealing must be maintained at all times to meet the environmental requirements of Dust/Sand and Powder exhaust.
- Control System consists of Temperature Control Unit, Humidity Control Unit, Wind Speed Control Unit and Concentration Control Unit.
- Control Panel consists of LED Controller (Other Options available) and DATA Collection.
- Uses electronic concentration sensors to automatically adjust and set dust and sand consistency levels.
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | 73.4°F to 158°F (± 2°F) | 23°C to 70°C (± 2°C) |
| Humidity Range | <30% RH | <30% RH |
| Air Speed | 1.0 to 10.0 m/s (Procedure I) 18.0 to 29.0 m/s (Procedure II) |
1.0 to 10.0 m/s (Procedure I) 18.0 to 29.0 m/s (Procedure II) |
| Dust & Sand Consistency | 3.0 to 17.6 g/m³ (10.7 ± 7 g/m³) (Procedure I) 0.18 + 0.2 g/m³; 1.1 ± 0.3 g/m³; 2.2 ± 0.5 g/m³ (Procedure II) |
3.0 to 17.6 g/m³ (10.7 ± 7 g/m³) (Procedure I) 0.18 + 0.2 g/m³; 1.1 ± 0.3 g/m³; 2.2 ± 0.5 g/m³ (Procedure II) |
| Interior Dimension | 23.6W x 23.6H x 23.6D IN | 600W x 600H x 600D mm |
| Exterior Dimension | 165W x 86.6H x 78.7D IN (approx.) | 4200W x 2200H x 2000D mm (approx.) |
| Door | 31.5W x 27.6H IN (Single Door) | 800W x 700H mm (Single Door) |
| Observation Window | 11.8W x 11.8H IN | 300W x 300H mm |
| Power Sources | 380/440/480VAC/50/60Hz | 380/440/480VAC/50/60Hz |
Not Available
EPR-114 /111/113/115/220 EPR Oven
EPR-114 Oven
EPR-111 Oven
EPR-113 Oven
EPR-115 Oven
EPR-220 Oven
- Hot Air Circulation Method
- JIS K-Type, Thermo Couple Temperature Sensor
- Sheathed Heater (SUS-304)
- 2 Shelf Racks (Up to 15 kg/rack)
- Top Exhaust Outlet Port (Diameter: 35 mm)
- Left Side Cable Access Port (Diameter: 35 mm)
- RS-485 Communication Option
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | 104 to 500 °F | 40 to 260 °C |
| Time to Reach Max. Temp. | 50 min | 50 min |
| Temp Distribution Accuracy | ±1.5 °F at 212 °F, ±2.5 °F at 392 °F, ±3.0 °F at 500 °F | ±1.5 °C at 100 °C, ±2.5 °C at 200 °C, ±3.0 °C at 260 °C |
| Heater Wattage | 1.4 KW | 1.4 KW |
| Inside Cubic Volume | 24.04 GAL | 91 Liters |
| Interior Dimension | 17.72W x 17.72D x 17.72H IN | 450W x 450D x 450H mm |
| Exterior Dimension | 29.53W x 25.04D x 35.67H IN | 750W x 636D x 906H mm |
| Observation Window | 7.87W x 15.75H IN | 200W x 400H mm |
| Interior Construction | Stainless Steel SUS-304 | Stainless Steel SUS-304 |
| Weight | 125.66 lbs | 57 Kg |
| Power Supply Voltage | 100VAC/Single-Phase | 100VAC/Single-Phase |
| Max. Power Consumption | 1.2 KVA | 1.2 KVA |
Not Available
HST-101/225/504/800/1000 Fast Ramp Chamber
Fast ramp chamber used for heating and cooling at faster than normal rates. At 15˚C/Min this chamber can get to the desired temperature in a number of minutes and maintain desired temperatures for various testing needs. Meets:
- USB Port for data storage
- Ethernet Port for PC interface
- Two sets of Stainless Steel Shelves
- Stainless Steel #304 interior
- One cable access port with Neoprene plug
- 7″ LCD touchscreen controller
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Exterior Dimensions | 1150W x 1870H x 1210D mm | 1150W x 1870H x 1210D mm |
| Interior Dimension | 13.78W x 23.62H x 13.78D Inch | 600W x 750H x 5000D mm |
| Temp Range | -94˚F ~ 302˚F | -40°C to 150°C |
| Temp Constancy | ≤ ±0.9˚F | ±0.5°C |
| Temp Uniformity | ≤ ±3.6˚F | ±2.0°C |
| Heating Rate | 59˚F/Min | 15˚C/Min |
| Cooling Rate | 50˚F/Min | 15˚C/Min |
| Weight | ~1000 Lbs | 550 kg [Approx.] |
| AC Power | 480VAC/60Hz/3-Phase/50A/16kW (Other Options Available) |
Not Available
HST-101/225/504/800/1000 Fast Ramp Chamber
Fast ramp chamber used for heating and cooling at faster than normal rates. At 15˚C/Min this chamber can get to the desired temperature in a number of minutes and maintain desired temperatures for various testing needs. Meets:
- USB Port for data storage
- Ethernet Port for PC interface
- Two sets of Stainless Steel Shelves
- Stainless Steel #304 interior
- One cable access port with Neoprene plug
- 7″ LCD touchscreen controller
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Exterior Dimensions | 1150W x 1870H x 1210D mm | 1150W x 1870H x 1210D mm |
| Interior Dimension | 13.78W x 23.62H x 13.78D Inch | 600W x 750H x 5000D mm |
| Temp Range | -94˚F ~ 302˚F | -40°C to 150°C |
| Temp Constancy | ≤ ±0.9˚F | ±0.5°C |
| Temp Uniformity | ≤ ±3.6˚F | ±2.0°C |
| Heating Rate | 59˚F/Min | 15˚C/Min |
| Cooling Rate | 50˚F/Min | 15˚C/Min |
| Weight | ~1000 Lbs | 550 kg [Approx.] |
| AC Power | 480VAC/60Hz/3-Phase/50A/16kW (Other Options Available) |
No Models Avaliable
HCTS-230JTUS3 The HCTS Series of FAST RAMP RATE THERMAL SHOCK CHAMBERS
Consists of a single cabinet for subjecting test specimens to high and Low temperature extremes and changes at fast rates.
These chambers are used for applications requiring Fast Ramp Rates Thermal Shock and Temperature Cycling.
Do not require LN2, CO2 or expensive refrigerants utilizing the Air-to-Air method for providing Fast Ramp Up and Ramp Down Rates. Does not require elevators for moving the test specimens. These chambers with small footprints come in several interior sizes from the very small interiors of 50L (1.7 cu ft), 72L (2.5 cu ft) to the large interiors of 230L (8 cu ft), 760L (26 cu ft) .
These chambers are controlled with powerful UMC 1300 series of Programmable Temperature. Controllers with USB/Ethernet capabilities and several options.
Unlike the competition, the customer can realize great cost savings due to the elimination of liquid nitrogen, compressed air or other gaseous materials. Low water usage and reduced cooling water requirements as well as lower wattage of power requirements, small foot prints, less lab space classifies these chambers under the �Green and Clean� Technology Environment
- UMC 1300 Series of powerful controllers
- Capability of controlling product temperature
- Stainless Steel PT100 type sensors
- Water-cooled compressors
- Independent High and Low limit protection
- Access ports
- Shielded Electric heaters
- High Density Polyurethane Insulation or other options
- Two sets of stainless steel adjustable shelves
- Heavy duty lockable casters
- Powerful Cascading Compressors
- Water-cooled Carapace condenser
- Auto adjust evaporator
- Programmable controller
- USB/Ethernet or RS232/RS485 Communications
- Safety controls via solid state relays and switches
- Non-corrosive silicone type sealing
- Well sealed door comprising of dual gaskets
- Usage of high efficiency of heating & cooling technology
- Prevention of condensation or frost during low temperature testing
- Options include variable speed fans
- Two or three-zone damper control system
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | -65 °C ~ +150 °C | -65 °C ~ +150 °C |
| High Temperature Range | +60 °C ~ +200 °C | +60 °C ~ +200 °C |
| Low Temperature Range | -75 °C ~ -10 °C | -75 °C ~ -10 °C |
| Workspace Size | 230 Liters | 230 Liters |
| Interior Dimension | 700 W x 650 D x 500 H (mm) | 700 W x 650 D x 500 H (mm) |
| Exterior Dimension | 1900 W x 2450 D x 1900 H (mm) | 1900 W x 2450 D x 1900 H (mm) |
| AC Power Sources | 480VAC, 3-Phase | 480VAC, 3-Phase |
| Weight | ?? lbs | ?? Kg |
| Inquire about other combinations of temperature ranges | ||
Not Available
HOT-1100YVCF Special High Temperature Chamber
High temperature ovens used for an array of different reliability tests requiring extreme high temperatures. Customizable to you specifications
- PC Link and MODBUS communication
- Stainless Steel #304 interior
- Digital display controller
- 2″ Cable access port w/ plugs
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimension | 25.59W x 55.12H x 63.0D Inch | 650W x 1000H x 1600D mm |
| Exterior Size | 46.85W x 59.84H x 86.61D Inch | 1190W x 1520H x 2200D mm |
| Temp Range | 68˚F (Room) ~ 660˚F | 20˚C ~ 350˚C |
| Temp Constancy | ≤ ±1.8ºF | ≤ ±1.0ºC |
| Temp Uniformity | ≤ ±7.2ºC | ≤ ±4.0ºC |
| Weight | ~880 Lbs | ~400 Kg |
| AC Power | 220VAC / 60Hz / 3-Phase / 35A / 12Kw |
Not Available
HST-512/1000/1620/1920-PS Settling Dust Chamber
Consists of a single cabinet for subjecting test specimens to high and Low temperature extremes and changes at fast rates.
These chambers are used for applications requiring Fast Ramp Rates Thermal Shock and Temperature Cycling.
Do not require LN2, CO2 or expensive refrigerants utilizing the Air-to-Air method for providing Fast Ramp Up and Ramp Down Rates. Does not require elevators for moving the test specimens. These chambers with small footprints come in several interior sizes from the very small interiors of 50L (1.7 cu ft), 72L (2.5 cu ft) to the large interiors of 230L (8 cu ft), 760L (26 cu ft) .
These chambers are controlled with powerful UMC 1300 series of Programmable Temperature. Controllers with USB/Ethernet capabilities and several options.
Unlike the competition, the customer can realize great cost savings due to the elimination of liquid nitrogen, compressed air or other gaseous materials. Low water usage and reduced cooling water requirements as well as lower wattage of power requirements, small foot prints, less lab space classifies these chambers under the �Green and Clean� Technology Environment
- UMC 1300 Series of powerful controllers
- Capability of controlling product temperature
- Stainless Steel PT100 type sensors
- Water-cooled compressors
- Independent High and Low limit protection
- Access ports
- Shielded Electric heaters
- High Density Polyurethane Insulation or other options
- Two sets of stainless steel adjustable shelves
- Heavy duty lockable casters
- Powerful Cascading Compressors
- Water-cooled Carapace condenser
- Auto adjust evaporator
- Programmable controller
- USB/Ethernet or RS232/RS485 Communications
- Safety controls via solid state relays and switches
- Non-corrosive silicone type sealing
- Well sealed door comprising of dual gaskets
- Usage of high efficiency of heating & cooling technology
- Prevention of condensation or frost during low temperature testing
- Options include variable speed fans
- Two or three-zone damper control system
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | -65 °C ~ +150 °C | -65 °C ~ +150 °C |
| High Temperature Range | +60 °C ~ +200 °C | +60 °C ~ +200 °C |
| Low Temperature Range | -75 °C ~ -10 °C | -75 °C ~ -10 °C |
| Workspace Size | 230 Liters | 230 Liters |
| Interior Dimension | 700 W x 650 D x 500 H (mm) | 700 W x 650 D x 500 H (mm) |
| Exterior Dimension | 1900 W x 2450 D x 1900 (mm) | 1900 W x 2450 D x 1900 (mm) |
| AC Power Sources | 480VAC, 3-Phase | 480VAC, 3-Phase |
| Weight | ?? lbs | ?? Kg |
| Inquire about other combinations of temperature ranges | Please contact us for custom temperature configurations. | |
Not Available
PC-702R8 Large Sized HAST/PCT Chamber
PC-702R8 Large Sized HAST/PCT Chamber
–
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Dimensions | 1403W x 1670D x 1750H mm (Except a protruding portion) | |
| Test Chamber Size | 700φ x 1066D mm (Shell part: 720D mm) | |
| Power Source | 3.0 to 17.6 g/m³ (min.) (17.6 ± 7 g/m³) | 3.0 to 17.6 g/m³ (min.) (17.6 ± 7 g/m³) |
| Interior Dimension | 39.4W x 31.5H x 31.5D IN | 1000W x 800H x 800D mm |
| Exterior Dimension | 165W x 86.6H x 63D IN | 4200W x 2200H x 1600D mm |
| Door | 43.3 x 35.4 IN | 1100 x 900 mm |
| Observation Window | 23.6 x 23.6 IN | 600 x 600 mm |
| Power Sources | 440VAC/60Hz/70A/45KW | 440VAC/60Hz/70A/45KW |
Not Available
Ozone Climatic Test Chamber Ozone Climatic Test Chamber
Ozone Climatic Test Chamber
–
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimension | 17.71W x 19.68H x 17.70D Inch | 450W x 500H x 450D mm |
| Temp Range | 50˚F ~ 160˚F | 10˚C ~ 70˚C |
| Temp Fluctuation | 0.9˚F | 0.5˚C |
| Humidity Range | > 65%RH | > 65%RH |
| Ozone Density | 50~1000 pphm | 50~1000 pphm |
| Heating Rate | ||
| Cooling Rate | ||
| Weight | ||
| AC Power | 220VAC / 60Hz / 3-Phase / 4Kw |
Not Available
HRT-IPX1/2-6500 Rain Test Chamber
Rain Chmaber used to simulate rain conditions for the mulitple testing stadards listed below. Also conduct spray tests.
Meets: JIS‐D 0203‐1976 as per R1, R2, S1 & S2 IEC‐60529.
Tests IPX1 – IPX6 IS‐9000 Part XVI‐1983 SAE J2245, J575 MIL-STD-810G Method 506.5 (Custom Chamber)
- USB Port for data storage
- Ethernet Port for PC interface
- Stainless Steel #304 interior
- LCD touchscreen controller
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimension | 86.60W x 62.99H x 72.83D Inch | 2200W x 1600H x 1850D mm |
| Drip Box Size | 21.65W x 29.52D Inch | 550W x 750D mm |
| Specimen Table Dia. | 15.75 Inch | 400 mm |
| Max Table Height (Adjustable) | 19.70 Inch | 500 mm |
| Vertical-axis Table Angle Range | 0~45˚ | 0~45˚ |
| Observation Window (w/ Wiper) | 23.62W x 23.62H Inch | 600W x 600H mm |
| Door Size | 39.3W x 39.3H Inch | 1000W x 1000H mm |
| Nozzle Grid Layout | 0.8 Inch | 20 mm |
| Storage Water Tank | 21 Gal | 80 L |
| Weight | ~800 Lbs | ~365 Kg |
| AC Power | 220VAC / 60Hz / 1-Phase / 25A |
Not Available
HST-108/-270/412/663/816/1080 RJY Salt Spray Chamber
This Salt Spray Chamber is a State-of-the-art product with several adjustable features and delivered as a plug and play system.
The system uses reliable long lasting and durable components to provide long life and years of error-free usage.
The chamber is useful for performing corrosion tests and stress tests based on several international test standards requiring automatic water controls and dry air.
The test specimens can be continuously exposed to the appropriate salt spray volume. The color operating panel and display are placed in ergonomic positions for ease of use and does not require any special programming knowledge by operator.
- Inner and outer chamber walls are reinforced with 15mm thick layers to prevent distortion and deformation due to high temperatures
- A solid Salt Solution Compensation bottle is placed out of sight for ease of cleaning and convenient operation
- Includes high-pressure resistant drum
- Imported Air Filter with water drain
- ¼ Pressure Meter Display for accurate & precise measurements
- Spray Mist Method absorbs the salt solution and nebulizes it to ensure continuous operation
- Spray Jet is made of tempered glass; with adjustable volume of the Spray Mist; set to various angles
- Direct Heating Method for rapid heating with minimum holding time
- Automatic feature of transferring to Constant Temperature Set Mode for temperature accuracy and power efficiency
- Heater element made of pure long lasting titanium
- Programmable LCD controller
- Dual digital LCD controller for Test Chamber and the Pressure barrel
- LCD controller includes a microcomputer with automatic calculating function to control tolerance to ± 1.0°C
- Pprecision long lasting LCD controller includes a printed circuit board treated with rot resistance compound and housed in a water-proofed housing
- Test Chamber Heating Trough is a Liquid Expansion safety Temperature controller settable from 0 to 120°C
- Automatic Water Control with Water level and Low Water detecting mechanism
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Interior Dimensions | 23.6W x 15.7D x 17.7H IN | 600W x 450D x 400H mm |
| Exterior Dimensions | 70.9W x 35.4D x 55.1H IN | 1140 W X 780 X 1050 |
| Volume | 3.6 cu ft | 108 Liters |
| Chamber Body | 0.315 IN PVC Panel (heat resistance and high temperature material) | 8 mm PVC Panel (heat resistance and high temperature material) |
| Chamber Sides | 0.315 IN reinforced durable structure | 8 mm reinforced durable structure |
| Hydrostatic Sealed Hood | 0.591 IN transparent shock resistance panel | 15 mm transparent shock resistance panel |
| Pressurized Air Barrel | SUS#304 Stainless Steel | SUS#304 Stainless Steel |
| Salt Spray Testing Method | NSS, ACSS, 95°F ± 2°F | NSS, ACSS, 35°C ± 2°C |
| Pressurized Air Barrel Test | 117°F ± 2°F | 47°C ± 2°C |
| Rot Resistance Testing Standard | CASS | CASS |
| Test Chamber Temperature | 122°F ± 2°F | 50°C ± 2°C |
| Pressurized Air Barrel Temperature | 145°F ± 2°F | 63°C ± 2°C |
| First Phase Adjustable Air Pressure | 2 Kg/cm² (approximate adjustment) | 2 Kg/cm² (approximate adjustment) |
| Second Phase Adjustable Air Pressure | 1 Kg/cm² (approximate adjustment) | 1 Kg/cm² (approximate adjustment) |
| Spray Mist Volume | 1 to 2 ml/h (adjustable, 80 cm2/h/ml is standard testing requirement for 16 hours) | 1 to 2 ml/h (adjustable, 80 cm2/h/ml is standard testing requirement for 16 hours) |
| Power Requirements | 220VAC/60Hz / Single Phase / 25 Amps | 220VAC/60Hz / Single Phase / 25 Amps (Other Options of Power available) |
| Testing Standards | Mil-Std 810G / Method 509.5 / ASTM-B11 | Mil-Std 810G / Method 509.5 / ASTM-B11 |
| Available Models | D x W x H |
|---|---|
| HST-108-RJY | 450x600x400 |
| HST-270-RJY | 600x900x500 |
| HST-412-RJY | 750x1100x500 |
| HST-663-RJY | 850x1300x600 |
| HST-816-RJY | 850x1600x600 |
| HST-1080-RJY | 900x1800x600 |
H-DT-IP-1000 Settling Dust Chamber
- Control Panel for Circulation Pump, Vibrator, and Timer
- High pressure circle air fan
- Safety features include Door Open, Pump Overload, Over current, and Emergency Stop
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | Room | Room |
| Interior Dimension | 39.4W x 39.4H x 39.4D Inch | 1000W x 1000H x 1000D mm |
| Exterior Dimension | 51.2W x 80.7H x 43.3D Inch | 1300W x 2050H x 1100D mm |
| Dust Input | 0.13 lb/ft³ | 2.0 Kg/m³ |
| Door | 39.4 x 39.4 Inch | 1000 x 1000 mm |
| Observation Window | 31.5 x 31.5 In | 800 x 800 mm |
| Power Source | 220VAC/60Hz/1.2A/0.3KW | 220VAC/60Hz/1.2A/0.3KW |
Not Available
HST-512/1000/1620/1920-PS Settling Dust Chamber
- Control Panel for Temperature, Humidity, and Timer
- High pressure circle air fan
- Safety features include Door Open, Pump Overload, Over current, and Emergency Stop
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | Room | Room |
| Interior Dimension | 19.7W x 19.7H x 19.7D Inch | 500W x 500H x 500D mm |
| Exterior Dimension | 31.5W x 59.1H x 27.6D Inch | 800W x 1500H x 700D mm |
| Dust Input | 0.13 lb/ft³ | 2.0 Kg/m³ |
| Door | 19.7 x 19.7 Inch | 500 x 500 mm |
| Observation Window | 11.8 x 11.8 Inch | 300 x 300 mm |
| Power Source | 220VAC / 60Hz / 1.2A / 0.3KW | 220VAC / 60Hz / 1.2A / 0.3KW |
Not Available
HST-512/1000/1620/1920-PS Settling Dust Chamber
- Hermetic Compressor
- Unique air flow system to create a uniform & constant set conditions inside the working area
- Stainless Steel, Electronic Heater
- Stainless Steel Humidifier
- Color LCD Model UMC1207 – 7″ Control System (Programmable and Fixed Value, Memory Capacity: 1000 Programs, 1000 Segments, Run Time: 99hrs 59min; 999 cycles, Communication Type: USB)
- Paperless recorder: Located inside the chamber
- 24 Hour Data history up to 300 days can be saved
- Intuitive display: Displays SV and PV data at the same time
- Data printing capability via USB connected to external printer (OPTIONAL)
- Color screen: Large 800X480, high-grade, Industrial class screen, touch input
- Internet ready via LAN for Remote control
- User inputs: Program name, Profiles, user information, etc.
- High Accuracy – 0.1 grade sensor
- Precision control: 0.1 grade, 9-zone PID, and manual adjustment capability
- Inputs: Supports dry and wet bulb as well as variable humidity
- User friendly – Does not require any specialized programming skills
- Diagnostic capability: Indicates errors and malfunction with instructions
- Security & Authorized user selection
- Software supports various applications including FTP functions
- Over Temperature protection
- Short Circuit
- Fire prevention
- Compressor Overload and High Pressure Protector
- Over, Absence and Phase Reverse Voltage Protector
- Lack of Water sensor/protector
- Humidifier Thermal Overshoot Protector
- Alarms
- Emergency Turn Off
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | R+104 °F to +212 °F | +40 °C to +100 °C |
| Temperature Constancy | ±41 °F | ±5 °C |
| Temperature Uniformity | ?? °F | ?? °C |
| Humidity Range | 50 to 98% | 50 to 98% |
| Humidity Constancy | ??% | ??% |
| Humidity Uniformity | ??% | ??% |
| Wind Speed | 1.64 to 4.92 ft/s | 0.5 to 1.5 m/s |
| Solar Intensity | 200 to 1200 ±10% W/m² | 200 to 1200 ±10% W/m² |
| Interior Dimension | 55.1W x 63H x 78.7D IN | 1400W x 1600H x 2000D mm |
| Exterior Dimension | 59.1W x 84.6H x 114D IN | 1500W x 2150H x 2900D mm |
| Interior Material | Stainless Steel Plate (SUS#304, Mist) | Stainless Steel Plate (SUS#304, Mist) |
| Weight | Approximately 6610 lbs | Approximately 3000 Kg |
| Radiation Strength Test | ??? to ???? ±10% W/m² | ??? to ???? ±10% W/m² |
| Test Temp Range | ?? to ??? °F | ?? to ??? °C |
| Test Duration/Time | ?? | ?? |
| Power | 440VAC / 60Hz / 3-Phase | 440VAC / 60Hz / 3-Phase |
Not Available
Solar Test Chamber
Well built, long lasting test chambers that meet/exceed the existing international standards required for the testing of Solar Panels, Solar Modules and other Solar Products, with unique, uniform airflow systems.
Specially designed Solar Panel/Product Testing chambers meeting the IEC requirements for:
Thermal Cycling Test [-40°C ~ +85°C]
Humidity Freeze Test [+85°C / 85% RH; -40°C]
Damp Heat Test [+85°C / 85% RH – 1000Hrs]
Nviro Solutions has been producing standard sizes of chambers based on the requirements of the Solar Industry as well as custom built chambers to meet unique customer sizes and specifications.
- Unique, uniform airflow system
- Fin Heat Disperse-Stainless Steel Heater
- Swiss made Temp-Hum Sensor
- Sirocco Fan
- PID controlled-Stainless Steel Humidifier
- Half-Hermetic, Cascading-Bitzer-German Model Compressors
- Dupont Type [No Fluorine] Refrigerant
- Carpace-Water Type Condenser
- Multi-segment, Automatic Adjustment Evaporator
- High Efficiency Temperite Type, US Made Oil Separator
- UMC1200 Series of LCD Display Color Touch Screen Programmable LCD Controller
- Stainless Steel Interior Material
- Stainless Steel [Baked Panel] Exterior Material
- Dual Doors
- Dual Windows with Anti Condensation, Frost Free
- Cable Ports with Plugs
- Water Tank- Auto Operation
- Pure Water Generating System
- Anti-explosive Interior Lamps
- Fire Protector
- Fast Recovery Fuses
- Compressor Overload Protect
- High Pressure Protect
- Phase Reversal Protect
- Circuit Breaker System
- Lack of Water Detector
- Humidifier Overshoot Protector
- Emergency Stop Switch
- Alarms
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Size | 78.7W x 98.4H x 142D IN [Other Sizes Available] | 2000W x 2500H x 3600D mm [Other Sizes Available] |
| Temperature Range | -58 °F to +194 °F | -50 °C to +90 °C |
| Temperature Constancy | ±0.9 °F | ±0.5 °C |
| Temperature Uniformity | ±3.6 °F | ±2.0 °C |
| Humidity Range | 30 to 95% RH | 30 to 95% RH |
| Humidity Constancy | ±2.5% RH | ±2.5% RH |
| Humidity Uniformity | ±5.0% RH | ±5.0% RH |
| Heating Rate | 2.7 °F / Minute [-40 °F to +185 °F] | 1.5 °C / Minute [-40 °C to +85 °C] |
| Cooling Rate | 2.16 °F / Minute [+185 °F to -40 °F] | 1.2 °C / Minute [+85 °C to -40 °C] |
| Weight | Approximately ?? lbs | Approximately ?? Kg |
| AC Power Sources | 480VAC/60Hz, 380VAC/50Hz, etc. | 480VAC/60Hz, 380VAC/50Hz, etc. |
Not Available
Temperature Humidity Reach In Chamber
HST-225B-LJS Temperature Humidity Reach In Chamber
Temperature Range: -40 to +150 °C Humidity
Range: 20 to 98% RH
- Stainless Steel Plate (SUS#304, Mist) Interior
- Steel Plate [Baked Panel] Exterior
- High Density Polyurethane Froth Insulation
- Unique, uniform airflow system
- Vane Type Sirocco, L134, Fan
- SUS #304 Stainless Steel, PT 100 Ω, Temp-Hum Sensors (2)
- Fin Heat Disperse-Stainless Steel Heater
- PID controlled-Stainless Steel Humidifier
- Hermetic-Single Compressor
- Dupont R-404A [No Fluorine] Refrigerant
- Air cooled Type (with motor) Condenser
- Multi-segment, Automatic Adjustment Evaporator
- TEMI-880 Programmable LCD Communication Controller
- RS-485 Communication Port/Connector
- SUS#304L-SS, PT 100 Ω Sensors
- Single Door
- Observation Window; Anti-condensation & frost free
- Cable Port with Plugs
- Water Tank
- Adjustable Shelves, Stainless Steel (2)
- Anti-explosive interior lamps [Lighted Push Button Switch]
- Set of Casters
- AC Power Cord
- Redundant safety features
- Fire Protection
- Fast recovery fuses
- High pressure protect
- Phase reversal protect
- Circuit breaker system
- Lack of water detector
- Humidifier thermal overshoot protector
- Alarms
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | -40 °F to +302 °F | -40°C to 150°C |
| Temperature Constancy | ±0.9°F (adjustable) | ±0.5°C (adjustable) |
| Temperature Uniformity | ±3.6°F | ±2.0°C |
| Humidity Range | 20 to 98% RH | 20 to 98% RH |
| Humidity Constancy | ±2.0% RH | ±2.0% RH |
| Humidity Uniformity | ±3.0% RH | ±3.0% RH |
| Heating Rate | -40 °F to +302 °F Approx. 60 mins. | +20°C to +150°C Approx. 40 mins. |
| Cooling Rate | +68 °F to -40 °F Approx. 60 mins. | +20°C to -40°C Approx. 70 mins. |
| Volume | 66.57 GAL | 225 Liters |
| Interior Dimension | 23.6W x 27.6H x 23.6D IN [Many Other Sizes Available] | 600W x 750H x 5000D mm [Many Other Sizes Available] |
| Exterior Dimension | 43.3W x 64.2H x 47.2D IN | 1150W x 1870H x 1210D mm |
| AC Power Sources | 220VAC/60Hz/Three-Phase, 16Amps [Other Options Available] | 220VAC/60Hz/Three-Phase, 16Amps [Other Options Available] |
| Weight | Approximately 661 lbs | Approximately 300 kg |
- HST-101A-LJS
- HST-225A-LJS
- HST-225B-LJS
- HST-225C-LJS
- HST-225D-LJS
- HST-225E-LJS (Customized)
HST-UV-2000 UV Test Chamber
HST-UV-2000 UV Test Chamber
- Hermetic [2.0HP] – Single Compressor
- Unique Air Flow System to Create a Uniform & Constant Circulation of Air
- Stainless Steel, Electronic Heater
- Uses a 3Kw Air-cooled Xenon Lamp (The spectrum energy distribution of this source is typically very close or similar to the natural solar spectrum. Also, the radiation strength can be automatically controlled.)
- Solar Radiation Sensor
- LED Control System (Radiation Strength Display, Temperature Control, Sensor is a Pt-100)
- Over Temperature protection
- Short Circuit protection
- High Pressure protection
- Door Open Sensing turns off UV Lamps
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | Room Temp +77 °F to +140 °F ±41 °F | Room Temp +25 °C to +60 °C ±5 °C |
| Radiation Strength | 800 to 1200 ±10% W/m² (adjustable) | 800 to 1200 ±10% W/m² (adjustable) |
| Wavelength | 280 to 3000 nm | 280 to 3000 nm |
| Irradiation Uniformity | ||
| Interior Dimension | 31.5W x 78.7H x 49.2D IN | 800W x 2000H x 1250D mm |
| Exterior Dimension | 49.2W x 86.6H x 59.1D IN | 1250W x 2200H x 1500D mm |
| Interior Material | Stainless Steel Plate (SUS#304, Mist) | Stainless Steel Plate (SUS#304, Mist) |
| Weight | Approximately ??? lbs | Approximately ??? Kg |
| Radiation Strength Test | ??? to ???? ±10% W/m² | ??? to ???? ±10% W/m² |
| Test Temp Range | ?? to ??? °F | ?? to ??? °C |
| Test Duration/Time | ?? | ?? |
| Power | 440VAC/60Hz/3-Phase | 440VAC/60Hz/3-Phase |
Not Available
Walk-in Chamber Walk-in Chamber
We provide walk-in controlled temperature boxes that will give you excellent temperature control and operation reliability you are looking for. Our systems are commercially proven and cost effective. We operate our business where reliability and customer satisfaction is our way of doing business.
Controlled Temperature Environment Features:
- Rapid design and installation capabilities
- Temperature range of -80°C to +100°C
- Excellent temperature uniformity.
- Redundant / Mission critical design criteria
- Multiple cooling circuits
- Multiple cooling techniques
- Easy of Assembly: Assemble piece by piece on site, does NOT require large entry doors.
- Built-in reliability: All major sub-systems procured from world class manufacturers.
- Easy to use: Easy to use graphic interface for test environment setup, through LCD color Touch Key in Controllers with Large Display.
- Safety protections: Alarm monitoring, Overheat, chamber protection, operator protection.
- Compressors can be remote and detached from main environment.
- Made to order accessories and options including:
- Strip curtains, shelving, temperature recorders, remote control panels, electrical drops.
- Ramping and multiple temperature zones within an environment.
- Lowered operating expenses:
- Higher insulation properties
- Superior refrigeration engineering
- Application specific design
Our systems are designed to guarantee the uniformity of the Temperature & Humidity with no dead zones.
Nviro Solutions will quickly design and engineer a system to meet your needs.
| Specification | Specification in US | Specification in Metric |
|---|
(Customized)
NO PRODUCTS AVAILABLE
email at info@nvirolsolutions.com for more info